Silverarrow PRO 6, with 6 springs arm for cameras from 4kg to 12,8kgs.
Price includes Free Shipping Worldwide door to door delivery by Fedex & Free Custom taxes up to 98%.
FACTORY REFURBISHED:
If available the factory refurbished version, for more details on Factory refurbished items please go to SUPPORT section WARRANTY to read more, in this particular case the factory refurbished and the regular versions have the same max payload, in other products see carefully that the max payload may be different when compaired to the regular version.
Silverarrow Pro 6, Basson Steady Camera stabilizer, max payload 12,8kgs
SILVERARROW PRO6
This professional camera stabilization system is ideal for camcorders from 9 lbs = 4kgs up to 28 lbs = 12,8kgs.We also sell a hybrid ready version of this camera stabilizer that is the version compatible with hybrid rotary head, if you want to make this steady compatible with Endless rotary head or Infinia rotary head, you must buy the HYBRID READY version that is customized for that purpose from the beginning.
WHAT ARE THE DIFFERENCES BETWEEN the HYBRID READY version and the standard Silverarrow Pro 6?
The NEW HYBRYD READY version has several improvements and differences, such as higher payload capacity, the new isolate arm with decompressor which reduces the fatigue and duplicates the time you can hold it.
It comes with 3 v-mount sockets instead of 1, which increases the time of usage by 3, it also has 24v output to power the rotary head.
The new gimbal handle on the HYBRID VERSION puts total control over your camera into the palm of your hand, because now it has 3 articulated clamps with 1/4 male screw to attach any 5 inch or 7 inch monitor as well as a phone to control the camera via app, and a third clamp to attach a wireless lens control to control the zoom or focus of your lens.
it comes with HDMI and 14v output on the gimbal handle to power this monitor, and it also comes with the new quick release sliding plate on top, all this new parts will replace the old parts of the classic Silverarrow PRO 6 and also the pivot head will be replaced for the new flat head with the quick release plate.
It's not only the perfect choice for customers willing to buy the rotary head in the near future, but also all this improvements makes this version our top camera stabilizer.For more detailed photos about this version please refer to the SILVERARROW HYBRID READY.
Packing List
2 Camera micrometric sliding plates With new pivot head
1 Socket for V-MOUNT battery
1 triple padded vest with low fatigue arm, and extended swivel arm
1 Fully bearing mounted triaxial handle
1 double Telescopic Anamorphic post, ready to mount a 12v lcd monitor
1 Battery Lead acid 3,4Amh + 110/ 220 to 12v charger and wires for connections
1 Lighted Lcd display to see battery level, 2 female lighter plugs 12v positive to center
1 Double shock absorber arm with double pulley system end 6 springs2 HDMI wires already installed inside the post
1 Introductory Cd rom
1 Docking bracket adapter with hanger for a focus stand
1 Warranty card + set up guide
Picture taken with V-mount battery, camera and Lcd monitors not included
WHAT ELSE DO YOU NEED, THAT IT IS NOT INCLUDED AND THAT WE DO NOT SELL:
Any 12v to 14,8volts Lcd monitor 7 inches up to 10 inches HDMI or SDI depending on which version you choose.If you choose the HDMI version you can always add a second monitor on the camera on the side or behind your camera with SDI video signal for a good reading of all professional specs, and from this monitor you can output the signal video via HDMI to the other lcd monitor located at the bottom of the center post on the camera stabilizer, then of course if you are not using HDMI video signal at all you can change the HDMI wire that it is inside the center post, and change it for SDI cable.
If you want only an SDI cable inside the post instead of HDMI cable, this modification job can be done by us in our factory specially for you for u$s 400.-
We will remove the HDMI cable and put one SDI wire model 1855A Belden (Digital Video, 6 Gb/s UHDTV resolution of 3,840 x 2,160 pixels, HD-SDI 1080p) 75 Ohm SDI Coax, Mini RG-59, 23 AWG Solid Bare Copper Conductor, PE Insulation, Foil + 95% Tinned Copper Braid.
You can check the full specs of the cable under the follwing link.
https://www.belden.com/products/cable/video-cable/coaxial-video-cable/1855a
Or if you preffer you can do this modification on your own if you are a handy person or if you have your own technician.
So once you receive the steady you can remove the top plate and also open one of the side panels of the base of the post and gently remove the hdmi wire and place the new SDI wire instead.
Or you want it more simple you can use an external SDI cable to connect your camera to the monitor at the bottom of the post with 6 feet long SDI cable, and this way you will not need to make any modifications so when you need SDI video signal you use an external SDI cable, and if you need HDMI video signal, you already have it installed inside the center post of the steady.
Any Stand capable to support at least 30kg 65 Lbs at a height of 4 feet /1.30mts, for example Manfrotto 070
Any V-MOUNT battery, and its charger
We accept bank transfer as well as PAY PAL payments, with this last opcion we will only ship your purchase to Pay Pal verified address, and also paypal fees must be paid by the customer, this fees increase the price a 5,5%.The price of the steady includes FREE shipping Worldwide door to door delivery by Fedex.
FACTORY REFURBISHED:
If available the factory refurbished version, for more details on Factory refurbished items please go to SUPPORT section WARRANTY to read more, in this particular case the factory refurbished and the regular versions have the same max payload, in other products see carefully that the max payload may be different when compaired to the regular version.